CMI Rope Course Pulley RP126

The K-1 Belay Pulley can be used for both rope and cable and is equally at home on a belay cable or a Flying Squirrel. It is designed for 3/8” wire rope or up to a 1/2” belay rope. Connect the K-1 Belay Pulley to the Klinesaver SRD using a 12 or 14mm rapid link on traversing belays. The durable, low friction bushing pulley has contoured edges for an easier connection to belay cables and to prevent rope chafe and is tensile tested to over 14,000 lbs. (ACCT minimum standard is 5,000 lbs.).

Related Categories:

• Sports & PE : Project Adventure : Challenge Course Equipment : Pulleys

Primary Brand

CMI

Quantity Per Pack

1